I Introduction
Standard Analog SCART signals (with RGB, CVBS, S-Video and Audio
signals) to HD HDMI digital signals. It will upgrade RGB, CVBS, S-Video
signals to 1080P highest resolutions. Widely used for DVD, Digital TV
Set-up Box, Hard Drive Players and so on.
II. Feature
A). Upgrade CVBS/SVIDEO signal which to 720P or 1080P
B). HDMI Output: 720P, 1080P/60Hz
Support DVI output: 1024X760, 1360X768, 1680X1050
C). HDMI Display Ratio model: 4: 3, 16: 9, 16: 10, 2.35: 1
D). OSD Menu Display, Remote Control adjust RGB parameter freely
E). Support separate output via L/R output
F). Video Input: CVBS(NTSC/PAL)SVIDEO
III. Interface Draw
IV. Interface's illustrate
LED_Power Indicates
IR_Remote Control Receiver
MENU_Menu Key
UP_Up Key/Increase (When not in menu mode, press UP key will change the Input Mode)
DOWN_Down Key/Reduce (When not in menu mode, press DOWN key will change HDMI output resolutions)
HDMI-out_Connect TV or Display which with HDMI
L/R-OUT_Connect sound box
L/R-IN_Connect TV Set-up Box or DVD audio output
S-VIDEO-IN_Connect TV Set-up Box or DVD Video output
VIDEO-IN_Connect TV Set-up Box or DVD CVBS output
V. Remote Control Instructions
1. Red Key: Press it will turn OFF, and press again will turn on. When turn on, the LED will light on, or LED will off.
2. RS Key (HDMI Output Model): Default output is 720P, press RS key
will in turn show720P>1080P>1024X768>1360X768>1680X1050. And
1024X768, 1360X768, 1680X1050 is DVI compatible mode.
3. A Key: Press it HDMI output display ratio will show 4: 3
4. B Key: Press it HDMI output display ratio will show 16: 10
5. C Key: Press it HDMI output display ratio will show 2.35: 1
6. RES Key: Press it HDMI output display ratio will show 16: 9 (Default HDMI output display ratio is 16: 9)
7. SOURCE Key: Press it the input signals will choose between SCART(AV) and SVIDEO.
8. OSD Key: Press it the display screen will show Video Converter working situations.
9. UP Key: Enter MENU, press it will choose up menu.
10. DOWN Key: Enter MENU, press it will choose down menu.
11. LEFT Key: Enter MENU, press it will reduce numerical value
12. RIGHT Key: Enter MENU, press it will increase numerical value.
13. ENTER Key: Press once, will enter MENU mode. When in MENU mode,
press it again will enter or quit confirm key (Menu show red, press it
will quit. Menu show purple, press it will enter. )
VI. Install and Set up
1. Menu set up
Press MENU will show OSD menu, Press UP or DOWN key to choose what
menu which you need to adjust. When menu which you want to adjust show
red, just press MENU key. When turn to purple, press UP or DOWN key to
adjust it. When you get the ideal effect, just press MENU again. Turn
the purple to red. Then will disappear in 5 seconds. Will auto keep this
set up.
2. UP/DOWN Separate Function
UP_When not in menu mode, press UP key will change the Input Mode.
(Default Input is SCART-AV Input, press UP key will turn to SVIDEO
Input)
DOWN_When not in menu mode,
Press DOWN key will change HDMI output resolutions(Default output is 720P,
Press DWON key will show 720P-1080P-1024X768-1360X768-1680X1050
In turn. And 1024X768, 1360X768, 1680X1050 is DVI compatible mode. )
